Hα Emission Imaging during Supersonic Molecular Beam Injection by CCD Photograph

There are several fuelling methods for tokamak plasma： pellet injection （PI）, gas puffing （GP）, neutral beam injection （NBI） and supersonic molecular beam injection （SMBI） .SMBI has been created in the Southwestern Institute of Physics, China.     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

Calculation of the Safety Factor of the Ohmic HL-2A Single Null Divertor Discharge

The safety most important factor profile is one of the the plasma discharge. For limiter configuration, people usually use the following cylindrical approximation formula to calculate it q（r）=5r^2BT/RIp where r is the minor radius of the plasma toms, R is the major radius （in m） , BT is the toroidal magnetic field （in T）, Ip is the total toroidal current（in MA）.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

罗氏沼虾幼苗体内一种极小病毒的序列测定与分析

从患罗氏沼虾幼苗肌肉白浊病的幼虾体内分离到两种病毒颗粒,诺达病毒(MrNV)和直径只有15nm的小病毒颗粒(extrasmallvirus,XSV),本文通过建立病毒cDNA文库获得XSV基因组的部分序列,在此基础上合成探针,用从病虾组织中提取的总PNA进行Northern杂交,结果表明XSV基因组至少包括两条RNA片段.利用不同的方法对XSV的两端序列进行克隆和测定,分别得到了872、831和662bp3个相互重叠的序列片段,这3个序列的阅读框编码一个相同的大小在17×103左右的蛋白.     

A DEMONSTRATION OF 1×8 LINEAR ARRAY YBCO TRANSITION EDGE IR BOLOMETER

A high-T_c superconducting array microbolometer has been fabricated by using a YBCO film. Optical measurements gave moderate performance as individual detector, but singnificant improverment appears possible.     

B-Spline with Symplectic Algorithm Method for Solution of Time-Dependent Schrodinger Equations

A B-spline with the symplectic algorithm method for the solution of time-dependent Schrodinger equations （TDSEs） is introduced. The spatial part of the wavefunction is expanded by B-spline and the time evolution is given in a symplectic scheme. This method allows us to obtain a highly accurate and stable solution of TDSEs. The effectiveness and efficiency of this method is demonstrated by the high-order harmonic spectra of one-dimensional atoms in comparison with other references.     

Eu,Dy共掺杂SrAl2O4长余辉材料制备新工艺

活化Al-Sr合金粉末水解制备SrAl₂O₄长余辉材料的前驱体,并采用高温固相反应法制备出Eu,Dy共掺杂的SrAl₂O₄长余辉材料,对其微观结构和发光特性进行了研究。实验结果表明:前驱体中Al、Sr元素在微观状态下分布均匀,所制成的长余辉发光材料的发射主峰位于520nm附近,为典型的Eu²⁺离子4f5d-4f的特征发射,初始亮度达到18cd/m²,余辉时间长达46h。